Airflow, Caution when closing the door, A caution – Kenmore ELITE 795.7104 User Manual

Page 19: Adjusting control settings, Using your refrigerator

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING YOUR REFRIGERATOR

Airflow

In order to ensure proper temperatures, air must flow

between the refrigerator and freezer sections. The
arrows in the figure indicate air vent locations and

direction of airflow.

Do not block any of the cool air vents with food
packages.

If the vents are blocked, airflow will be

interrupted and temperature and moisture problems
may occur.

If you add a large amount of food,

the refrigerator will take longer to
cool it.

At initial start-up, allow your

refrigerator to run for 2 or 3 hours
before placing food in it.

Caution When Closing the Door

A CAUTION

To reduce the risk of door scratches and breaking the
door mullion, please make sure that the refrigerator
door mullion is always folded in.

If moisture gathers on the refrigerator door mullion at

any point, turn off the Energy Saver mode until the
issue is resolved.

ADJUSTING CONTROL SETTINGS

It is best to wait 24 hours for the refrigerator to cool

down completely before making any adjustments to
the temperature settings. The initial settings

mentioned in SETTING THE CONTROLS section
should be correct for normal household refrigerator
use. The controls are set correctly when milk or juice
is as cold as you like and when ice cream is firm.

The refrigerator control functions as the thermostat
for the entire appliance (refrigerator and freezer
sections). The colder the setting, the longer the
compressor will run to keep the temperature colder.
The freezer control adjusts the cold air flow from the
freezer to the refrigerator. Setting the freezer control
to a lower temperature keeps more cold air in the
freezer compartment to make it colder.

If you need to adjust temperatures in the refrigerator

or freezer, start by adjusting the refrigerator and
allow 24 hours for the temperatures to stabilize. If it

is still too warm or too cold, then adjust the freezer

control.

Always remember to wait at least 24 hours
between adjustments.

CONDITION/
REASON:

RECOMMENDED

ADJUSTMENT:

■ REFRIGERATOR section too

warm

- Door opened often
- Large amount of food added
- Room temperature very warm

Adjust the REFRIGERATOR
temperature.

Note:

When changing

temperature settings, make
adjustments one increment at
a time and wait 24 hours
between adjustments.

■ FREEZER section too

warm/ice not made fast enough

- Door opened often
- Large amount of food added
- Very cold (below 55 °F) room

temperature (Compressor does

not cycle often enough)

- Heavy ice usage
- Air vents blocked by items

Adjust the REFRIGERATOR
temperature.

Note:

When changing

temperature settings, make
adjustments one increment at
a time and wait 24 hours
between adjustments.

Move items out of airstream

■ REFRIGERATOR section too

cold

- Controls not set correctly for

your conditions

Adjust the REFRIGERATOR
temperature.

Note:

When changing

temperature settings, make
adjustments one increment at
a time and wait 24 hours
between adjustments.

■ FREEZER section too cold
- Controls not set correctly for

your conditions

Adjust the REFRIGERATOR
temperature.

Note:

When changing

temperature settings, make
adjustments one increment at
a time and wait 24 hours
between adjustments.

19

Advertising