Control panel features, 0 0 o, O power (on/off) button – Kenmore ELITE 796.7927# User Manual

Page 19: 0 cycle selector knob and cycles, 0 start/pause button, 0 option buttons, 0 cycle modifier buttons, 0 time and status display, 0 steam functions, My cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO USE

WARNING:

To reduce the risk of fire, electric shock, or Injury to persons, read this entire

manual. Including the Important Safety Instructions, before operating this dryer.

CONTROL PANEL FEATURES

0

0

o

PO’ VER

OPTIONS

More Time |

' ...................

I My Cycle ,

Less Time

I Wrinkle Guard
I i

Easy Iron

j Static Shield

^

Damp Dry Signal i Chime ;

Drum Light

} Control

I

Normal

Buiky/Bedding

Casual

Heavy Duty

Towels

Sanitize

o

i

O POWER (On/Off) BUTTON

Press to turn the dryer ON. Press again to turn

the dryer OFF.

NOTE:

Pressing the Power button during a cycle

will cancel that cycle and any load settings will be lost.

0

CYCLE SELECTOR KNOB AND CYCLES

The CYCLE SELECTOR KNOB is used to select the
desired dry cycle by rotating the knob in either direc­
tion until the desired cycle LED is illuminated. Once

the desired cycle has been selected, the standard
presets for that cycle will be shown in the display.
These settings can be adjusted using the Cycle

Modifier or Option buttons anytime before starting the

cycle. (See the Cycle Guide on

page 21

for allowable

settings. To protect your fabrics, not all settings are
allowed in all cycles.)

0 START/PAUSE BUTTON

Press the START/PAUSE button to begin the cycle.

The display will change, and the dryer will display the
estimated time (AUTO DRY) or set time (TIMED

DRY) remaining and start tumbling. To pause the

cycle at any time, open the dryer door or press the
START/PAUSE button. To resume the cycle where it
was stopped, press START/PAUSE again.

NOTE:

If the dryer has been stopped for more than

4 minutes, the dryer will turn off automatically and all
settings will be lost.

0

OPTION BUTTONS

The option buttons allow you to select additional
cycle options. The controls can be locked or

unlocked by pressing and holding the Control Lock
button for 5 seconds.
MORE TIME and LESS TIME options are not

available with Auto diy cycles.

For detailed information about the individual options,

please see the following pages.

J Workout Wear

! Small Load

,.j Délicates

I Express Dry

I Touch Up

I Air Dry

I! Rack Dry

PAUSE

0

CYCLE MODIFIER BUTTONS

Use these buttons to modify the settings for the
selected cycle. The lights above the buttons show the

current selection.

See page 24

for a complete

description

NOTE:

Some settings are not allowed on some

cycles.

0

TIME AND STATUS DISPLAY

The display shows the estimated time remaining and
the cycle status. The display also monitors the vent
status. See

page

23 for a complete description.

0

STEAM FUNCTIONS

Steam technology allows you to inject fabrics with a
swirling jet of hot steam to refresh clothes and
reduce static. Simply select the STEAM REFRESH
cycle or select either the STATIC SHIELD or EASY

IRON option.

NOTE:

The Static Shield and EASY IRON options

are not available on all cycles. See pages 26-27 for
steam function details.

(A
3
o

z

u

MY CYCLE

If you have a special combination of settings that you
use frequently, you can save these settings as a
MY CYCLE.

19

Advertising
This manual is related to the following products: