My cycle, Note – Kenmore ELITE 796.7927# User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO USE

Your dryer features several additional cycle options and special features to meet your individual needs. For all steam
features, see the following pages.

CYCLE OPTIONS AND SPECIAL FEATURES

STEAM FEATURES

All steam functions are described on pages 26-27.

To Add Cycle Options to a Cycle:

O Turn on the dryer.
©Turn the Cycle Selector Knob to select the desired

cycle.

0

Press the Cycle Option button(s) for the option you

would like to add.

O Press the START Button to start the cycle.

The dryer will start automatically.

WRINKLE GUARD

Wrinkle Guard

Selecting this option will tumble the
clothes for a few seconds every

few minutes without heat. This
option is active for 180 minutes

after the end of the cycle, or until the door is opened.
This helps prevent wrinkles in the clothes caused by

lying in the bottom of the drum when you can’t be there

to remove them immediately after the cycle is completed.

CONTROL LOCK

Use this option to disable the

controls. This feature allows you to

'________ ________ I prevent children from changing

cycles or operating the machine.

Once set, the CONTROL LOCK must be turned off
before the controls can be used. Once the dryer has shut
off, the power button will allow the machine to be turned
on, but the controls will still be locked. When the controls
are locked, the control lock light will be illuminated and
“CL” will be displayed alternately with the estimated time
remaining. Press and hold the CONTROL LOCK button

for 5 seconds to activate or deactivate the controls.

Control Lock

MY CYCLE

If you have a special combination

My Cycle

of settings that you use frequently,
you can save these settings as a

MY CYCLE. Select the cycle,

modifiers and options you want to use, then press and
hold the MY CYCLE button for three seconds. A chime

will sound to let you know that the settings have been

memorized. Select the cycle, modifiers and options you

want to use, then press and hold the MY CYCLE button
for three seconds. A chime will sound to let you know that
the settings have been memorized.

DRUM LIGHT

Drum Light

Use the DRUM LIGHT button to

turn on the light inside the drum
during cycle operation.

NOTE:

The drum light will also come on if the dryer door

is opened. However, after the dryer has been off for
more than 4 minutes, the drum light will be disabled until

the POWER button is pressed to turn on the dryer.

SANITIZE CYCLE

The SANITIZE cycle is designed to kill bacteria in your
clothing. When this cycle is selected, the temperature is
set to HIGH and the dry level is set to EXTRA DRY.
These default settings cannot be changed.

NOTE:

• Do NOT use this cycle with delicate items or fabrics.
• Steam cannot be added to the SANITIZE cycle.

RACK DRY CYCLE

RACK DRY cycle is designed to carefully dry items that

should not be tumbled in the dryer, such as sweaters,
stuffed animals, gym shoes, etc. This cycle uses gentle
heat to prevent overheating of items since they are not

tumbling.

NOTE:

Never use any cycle but RACK DRY when the

rack is being used.

(A
3
o

z

u

o

With the dryer door open, slide the rack into the
dryer drum.

25

0

Make sure the front of the rack is seated properly in

the recess on the lint filter housing at the front of the
drum. The two rear legs of the rack should be resting
on the rear wall just above the drum.

0

Place items to be dried on the rack. Make sure no

part of the articles hang over the edges of the rack, as

they might be contacted by the rotating drum causing

noise or damage to the drum or articles.

NOTE:

Be sure to remove the drying rack after using

the RACK DRY cycle.

Advertising
This manual is related to the following products: