Check filter, Drying, Cooling – Kenmore ELITE 796.7927# User Manual

Page 20: Q clean the lint filter, Q load the dryer, O turn on the dryer, O select a cycle, Select cycle modifiers, Select cycle options, Begin cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO USE

OPERATING THE DRYER

m

z

o
r

(7)

Normal |

Bulky/Bedding |

Casual I

Heavy Duty |

Towels I

Sanitize [

POWER

r \

I Workout Wear

I Small Load

I Delicates

I Express Dry

I Touch Up

I Air Dry

1

Rack Dry

i'iiOtIfjfRS;"

Temp

ii

Dry Level

It

Timed Dry

i More Time |

1 My Cycle Ii

1 Less Time |

i Wrinkle G

1

Easy Iron j

1 Static Shield j

1

Damp Dry Signal |

1 Chim' ■■

Drum Light |

i Control Lock 1

START/PAUSE

Check Filter

Drying

Cooling

Q CLEAN THE LINT FILTER

If the lint filter has not already been cleaned, lift out the

filter and remove the lint from the last load. This will

help ensure the fastest and most efficient drying perfor­
mance.

Q

LOAD THE DRYER

Load the dryer with the wet laundry from the washer. If

the load is extra large, you may need to divide it into

smaller loads for proper performance and fabric care.

O TURN ON THE DRYER

Press the POWER button to turn on the dryer. The

cycle LEDs will illuminate and a chime will sound, if
turned on. Referto page 19.

O SELECT A CYCLE

Turn the Cycle Selector Knob either direction until the

LED for the desired cycle is on. The preset tempera­

ture, dry level, and option settings for that cycle will be

shown. Refer to page 21.

©

SELECT CYCLE MODIFIERS

Default settings for the selected cycle can now be

changed if desired. This can be done using the cycle

modifier buttons as shown on page 24 (temperature,

dry level, timed dry and chime).

NOTE:

Not all options or modifiers are available on all

cycles. A different chime will sound and the LED will not
come on if the selection is not allowed.

SELECT CYCLE OPTIONS

Cycle options can be added using the option buttons
as shown on page 25 ~ 26 (wrinkle guard, static shield
and control lock).

NOTE:

Not all options or modifiers are available on all

cycles. A different chime will sound and the LED will

not come on if the selection is not allowed.

BEGIN CYCLE

Press the START/PAUSE button to begin the cycle.

The cycle can be paused at any time either by open­

ing the door or by pressing the START/PAUSE button.
If the cycle is not restarted within 4 minutes, the dryer

will shut off and the cycle settings will be lost.

END OF CYCLE

When the cycle is finished, the chime will sound if it is
set. Remove your clothing from the diyer immediately
to reduce wrinkling. If Wrinkle Guard is selected, the
dryer will tumble briefly every few minutes to help pre­
vent wrinkles from setting in the clothes.

20

Advertising
This manual is related to the following products: