Set recharge (regeneration) start time, Figure 19, Figure 20 – Kenmore 625.3835 User Manual
Page 13: Programming the softener, J- il
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Softener
SET RECHARGE (REGENERATION) START TIME
If you completed the previous step, the words “RE
CHARGE TIME" should show in the display. Otherwise,
press the SELECT button several times until they do.
J-lin ‘
L-ULI
RECHARGE
TIME
Figure 19
1. The softener’s default recharge start time is 2:00 AM.
This is normally a time of day when water is not
being used in the household. Hard water bypasses
the softener if the household draws water during the
recharge cycle. If a different recharge start time is
desired, press the
A
UP or
V
DOWN buttons to
change the time, in 1-hour increments. Be sure AM or
PM is correct.
2.
When the desired recharge start time is displayed,
press the SELECT button, and the display will return
to the normal run (time of day) screen.
j- O-
J- IL
WATER FLOW
Figure 20
13