Questions? before you call for service, Burner flames very large or yellow, Light but oven does not – Kenmore 362.72239 User Manual
Page 40: Problem, Possible cause
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
QUESTIONS? BEFORE YOU CALL FOR SERVICE ,..
PROBLEM
TOP BURNERS DO NOT
LIGHT OR DO NOT
BURN EVENLY
tmF • 11 IF mm w !>«»*»•« *
POSSIBLE CAUSE
Make sure efectrica! plug is plugged into a live power outlet-
Burner holes on the side or around the top of burner may be clogged.
Remove burners (on models with standard twin burners) or burner heads
(on models with seated burners) or burner caps on spiil-proof models, and
clean them with a sewing needle or twist-tie. Make sure you do not enlarge
the holes.. On spill-proof models, check electrode area for burned-on food
or grease.
‘
i
^
■
Make sure the drip pans (on some models) are installed correctly.
Piiot(s) is (are) not lit (on standing pilot models). See the Lighting
Instructions for Standing Pilot Models section in Surface Cooking,
BURNER FLAMES VERY
LARGE OR YELLOW
if range is connected to LP gas, contact the person who installed your range
or made the conversion.
V ^
«iURPArF RIJPIsIFRiil
wr 111
I
m
* %# ill« Iwkl l'%i>r
LiGHT BUT OVEN
DOES NOT
The oven gas shut-off valve may have accidentally been moved during
cleaning or moving., : \
;
,, . ,
. •
, • ' : :
To check the oven gas shut-off valve on standard twin burner models, raise the
cooktop and look for the gas shut-off lever at the extreme right rear corner.
Follow the directions in box A or B that match your regulator type.
Standard Twin Burner fiflodets
Standard Twin Burner Models
To check the oven gas shut-off valve on sealed burner models, remove i
the broiler drawer and took for the gas shut-off lever at the back of the range
40