Setting oven controls, Feature overview, Setting convection bake – Kenmore 790.99019 User Manual

Page 26: General convection bake instructions, Instructions, Press, Display, Setting surface controls -11, Convection bake, I;30dpi?e

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Oven Controls

FEATURE OVERVIEW

Convection Bake

Setting Convection Bake

Setting Convection Bake

Benefits of Convection Bake:

—Some foods cook up to 30% faster,

saving time and energy.

—Multiple rack baking.

—No special pans or bakeware needed.

The CONVECTION BAKE

pad controls the Convection Bake feature.

Use the Convection Bake feature when cooking speed is desired. The oven
can be programmed for Convection baking at any temperature between 300“ F
(149“ C) to 550“ F (288“ C).

Convection baking uses a fan to circulate the oven's heat evenly and
continuously within the oven (See Figure 1 ). This improved heat distribution
allows for fast, even cooking and browning results, it also gives better baking
results when using 2 or 3 racks at the same time. Breads and pastries brown
more evenly. Most foods cooked in a standard oven will cook faster and more
evenly with Convection Bake.

Air

circulation

during

Convection

Bake

1st Rack Position

2nd Rack Position

3rd Rack Position

4tri Rack Position

5tti Rack Position

etti Rack Position

Figure

General Convection Bake Instructions

1. When using Convection Bake, decrease your normal cooking times as shown on page 37. Adjust the cook time for

desired doneness as needed. Time reductions will vary depending on the amount and type of food to be cooked.
Cookies and biscuits should be baked on pans with no sides or very low sides to allow heated air to circulate around

the food. Food baked on pans with a dark finish will cook faster.

Preheating is not necessary when cooking casseroles with Convection Bake.

When using Convection Bake with a single rack, place oven rack in position 3 or 4. If cooking on multiple racks, place
the oven racks in positions 1,3 and 5 (for 3 racks) and positions 2 and 4 (for 2 racks; See Fig. 2).

Cakes have better results when baked with the Cake pad in the Food Categories feature.

2

.

3.

4.

INSTRUCTIONS

To set the oven for Convection Bake and
temperature to 350'*F:

1. Arrange interior oven racks and place food in oven.

Press (^). "CONV BAKE" will flash and will appear

in the display (Fig. 3).

Press (2) (J) (J). "CONV BAKE" and "350'"will

appear in the display (See Fig. 4).

Press(^^ . "CONV BAKE" and "PRE" will appear in the

PRESS

DISPLAY

2

.

3.

4.

display (Fig. 5) until the oven reaches 350“ F. A beep will sound
once the oven temperature reaches 350“ F and the display will
show "350®", "CONV BAKE" and the fan icon (Fig. 6).

Note: The oven icon will show a rotating fan within the square. This
rotating fan icon indicates when the Convection Fan is operating
(See rotating fan in Fig. 6).

Press

to stop Convection Bake or cancel Convection Bake

CD®®

Figure 4

I;30DPI?E

Figure 5

at any time.

Figure 6

26

Advertising
This manual is related to the following products: