Converting the lower element (cont’d), Awarning, A caution – Kenmore POWER MISER 153.316555 User Manual

Page 12: Converting the lower element -12, Installation instructions (contad)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation Instructions (contad)

Converting the Lower

Element (cont’d)

9. Replace terminal cover on thermostat making sure that the

locking tabs on the terminal cover are in place.

12

,

Complete wiring to the water heater, or if completed, turn
“ON” electric power to the water heater after filling the
tank with water.

AWARNING

Make sure the thermostat is flush against the tank, the

terminal cover is in place, and the insulation is replaced.

Failure to do so can result in DEATH, SERIOUS BODILY
INJURY, OR PROPERTY DAMAGE.

10. Replace the insulation block so that it completely covers

the thermostat and element.

■ hii-BliT

fell II1

■ fl'”ll«B II 1

■ n ll-B H I

■ ini>a

■ ii‘ii*iii'i

■ IHi<Bin

A CAUTION

Never use this water heater unless it is completely full of

water. To prevent damage to the tank and heating ele­

ment, the tank must be filled with water. Water must

flow from the hot water faucet before turning "ON”

power.

11. Replace the access panel.

12

Advertising