Slide-out shelves (on some models), To remove and replace a shelf in a metal frame, Shelves and shelf frames – Kenmore ELITE W10215709A User Manual
Page 15: To remove and replace a shelf/frame, Drop-down shelf (on some models), To remove and replace the drop-down shelf, To remove and replace the deli drawer, Crisper and convertible vegetable/meat drawers, To remove and replace drawers, Crisper or vegetable/meat drawer covers
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
itor
31 it;
Itiii
Your model may have glass or wire shelves. Store similar foods
together and adjust the shelves to fit different heights. This
reduces the time the refrigerator door Is open and saves energy.
Slide-Out Shelves (on some models)
To Remove and Replace a Shelf in a Metal Frame:
1. Pull the shelf forward to the stop. Tilt the front of the shelf up
and lift It slightly as you pull the shelf from the frame.
2. Replace the shelf by guiding It back Into the slots on the
frame and pushing the shelf In past the stop.
Shelves and Shelf Frames
To Remove and Replace a Shelf/Frame:
1. Remove the shelf/frame by tilting It up at the front and lifting It
out of the shelf supports.
2. Replace the shelf/frame by guiding the rear shelf hooks Into
the shelf supports. Tilt the front of the shelf up until rear shelf
hooks drop Into the shelf supports. Check that the shelf Is
securely In position.
Drop-Down Shelf (on some models)
To Remove and Replace the Drop-down Shelf:
1. Remove the drop-down shelf by sliding It up and back. Pull
forward slightly to release the rear pegs from the track as
shown.
With the rear pegs released, pull the shelf down and forward.
Replace the shelf by sliding the front pegs Into the track.
Push the shelf up and back until the rear pegs drop Into the
track. Pull down and forward to be sure the shelf Is securely
In place.
The dell drawer stores raisins, nuts, spreads, and other small
Items at normal refrigerator temperatures.
To Remove and Replace the Deli Drawer:
1
.
Remove the dell drawer by sliding It straight out to the stop.
Lift the front and slide the drawer out the rest of the way.
Replace the dell drawer by sliding It back past the stop.
Crisper and Convertible Vegetable/Meat Drawers
To Remove and Replace Drawers:
1
.
Slide crisper or meat drawer straight out to the stop. Lift the
front of drawer with one hand while supporting the bottom of
drawer with the other hand and slide the drawer out the rest
of the way.
Replace the crisper or meat drawer by sliding It back In fully
past the drawer stop.
Crisper or Vegetable/Meat Drawer Covers
To Remove and Replace Covers:
1. Remove the crisper and meat drawer. Press up In center of
crisper glass Insert until It rises above the plastic frame.
Holding the crisper glass firmly, slowly slide the glass Insert
forward to remove.
2. Lift crisper cover frame and remove. Repeat steps to remove
the meat drawer cover.
Replace back of meat drawer cover frame Into supports or
slides on side walls of the refrigerator and lower or slide the
front of the cover frame Into place.
Slide rear of glass Insert Into cover frame and lower front Into
place. Repeat steps to replace the crisper cover.
The convertible vegetable/meat drawer can be adjusted to
properly chill meats or vegetables. The air Inside the pan Is
cooled to avoid “spot” freezing and can be set to keep meats at
the National Livestock and Meat Board recommended storage
temperatures of 28° to 32°F (-2° to 0°C).
IMPORTANT: To extend freshness, wrap meats In airtight,
moisture-proof materials before storing. Always store meat as
recommended.
15