To remove and replace the freezer basket or bin, Door features, To remove and replace the bin – Kenmore ELITE W10215709A User Manual
Page 17: Chilled door bin control, Door rails or tins, Snap-on door rails or bins, To remove and replace the rails or bins, Door rails or tins fori some moefelsl
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Freezer flasket or Bin fpiastic bin on soniti rnodeisi
The freezer basket or bin can be used to store bags of frozen
fruits and vegetabies that may siide off freezer sheives.
To Remove and Replace the Freezer Basket or Bin:
1. Remove the basket or bin by siiding it out to the stop.
2. Lift the front to siide the basket or bin out the rest of the way.
3. Repiace the basket or bin by positioning it on the raiis. Lift the
basket or bin front siightiy whiie pushing it in fuiiy past the
stops.
DOOR FEATURES
Your modei may have some or aii of these features. Features that
can be purchased separateiy as product accessories are iabeied
with the word “Accessory.” Not aii accessories wiii fit aii modeis.
if you are interested in purchasing one of the accessories, piease
caii the toii-free number on the cover or in the “Accessories”
section.
To Remove and Replace the Bin:
1. Remove the bin by puiiing out on the tabs behind the basket
to reiease it from the door iiner.
2. Repiace the bin by aiigning the tabs with the buttons on the
sides of the door iiner. Firmiy snap the tabs onto the buttons
as shown.
Cooi air from the freezer is directed to the door bin directiy
beneath the vent.
NOTE: The dairy compartment and can rack are not chiiied.
Chilled Door Bin Control
The chiiied door bin controi is iocated on the ieft-hand side of the
refrigerator compartment.
Turn the controi ciockwise (right) to reduce the fiow of coid air
to the bin and make it iess coid.
Turn the controi counterciockwise (ieft) to increase the fiow of
coid air to the bin and make it coider.
Door Rails or tins
fori some moefelsl
The door raiis or bins may be removed for easier cieaning.
Snap-On Door Rails or Bins
To Remove and Replace the Rails or Bins:
1. Remove the raiis or bins by pushing in siightiy on the front of
the bracket whiie puiiing out on the inside tab. Repeat these
steps for the other end of the raii or bin.
2. Repiace the raiis or bins by aiigning the ends of the brackets
with the buttons on the sides of the door iiner. Firmiy snap
bracket onto the tabs above the sheif as shown.
17