Setting the controls, Ensuring proper air circulation, Using your refrigerator – Kenmore TRIO 795.7757 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

USING YOUR REFRIGERATOR

SETTING THE CONTROLS

Temperature
• Your refrigerator has a control pad on the dispenser that

lets you regulate the temperature in the freezer and
refrigerator compartments.

• Initially set the refrigerator control at 37“F (3°C) and the

freezer control at 0°F (-18°C). Leave it at this setting for
24 hours (one day) to stabilize. Then adjust the
compartment temperature as desired.

Freezer Relrlserotot

Dispenser

Temp

f^rRespt ______ ^

• Every time you touch the freezer temperature adjust

button, the temperature changes in a circulating order of
“0” >“-1 ” v“-2” >“-3” v“-4” >“-6” >“8” >“6” >“5” ^“4” >“3” >

2

>“1

” > “

0

” .

• Every time you touch the refrigerator temperature adjust

button, the temperature changes in a circulating order of

“37”..>“36”.>“35”.>“34”.>“33”.>“46”..>“45”.>“44”.>“43”.>

“42”.>“41”.>“40”.>“39”.>“38”.>“37”.

Ultra Ice

• When you touch the “Ultra Ice” button, the graphic

[(© ] will light up In the display and it continues for

24hours. It will automatically shut off after 24hours have

passed.
Or you can stop this function manually by touching the
button one more time.

• This function increases both icemaking and freezing

capabilities.

Dispenser

• You can select water, crushed ice, or

cubed ice by touching

Oispenser

button as

you desire.

' There could be some dripping after

dispensing.

It Is recommended to hold your cup

for a couple of seconds after
dispensing.

NOTE : The dispenser is desinged not to operate while

either refrigerator door is left open.

Filter

• Filter Reset: When the FILTER RESET icon turns on,

you have to change the water filter. Press the FILTER

RESET button for 3 seconds to turn the icon off. You
need to change the water filter approximately every 6
months.

A WARNING: If a door is open, the dispenser does not

work.

Light / Light Sensor

• If the light is set “Auto” mode, dispenser light will

automatically turn on and off according to the brightness
of room detected by light sensor.

Alarm
• When the power is connected to the refrigerator, door

alarm is initially set off and door alarm display will show

((]. When you touch button, the display will change

to C]i: and door alram function is now activated.

• When either refrigerator or the freezer door is left open

for more than 60 seconds, the alarm will ding to let you

know the door is open.

• When you close the door, the door alarm will stop dinging.
• If you want to disable the door alarm function, touch

button then the door alarm display will switched to

Lock

• When the power is initially connected to the refrigerator.

Lock function is off.

• If you want to activate Lock function to lock other

buttons, press and hold button for 3 seconds or
more. § sign will be displayed and the Lock function is
now enabled.

• No buttons other than button will work even

including dispenser button while Lock function is
enabled.

• To disable the Lock function, press and hold ^ button

for 3 seconds or more.

Temperature Mode Switch Function{°F <->°C)
• If you want to convert °F to °C or vice versa, press and

hold button and button simultaneously for 5

seconds or more.

ENSURING PROPER AIR CIRCULATION

Do not block air channels with any objects or food for air

circulation to prevent food loss due to the lack of cooling
air.

16

Advertising
This manual is related to the following products: