Crisper cover with lattice on inner surface, Modular door bin, Egg box – Kenmore TRIO 795.7757 User Manual
Page 23: Dairy bin, Using your refrigerator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
CRISPER COVER WITH LATTICE ON INNER
SURFACE
WARNING: Be careful when handling glass cover since
glass is not attached to cover.
To remove lattice
1. Be sure glass cover is removed.
2. Turn the cover frame over. Each lattice has its own
frame within the cover frame.
3. Pull left and right sides of lattice frame outward to
release lattice tabs from frame. Remove lattice.
To replace lattice
1. Pull sides of each lattice frame outward to re-insert
tabs of lattice into frame.
2. Slide the cover frame back into refrigerator and
securely onto frame support.
3. Place the glass cover back onto top of cover frame.
MODULAR DOOR BIN
The door bins are removable for easy cleaning and
adjusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired support
button and push down until it stops.
A WARNING: Somebody can be hurt if door bins are not
firmly assembled.
A NOTE: DO NOT adjust a bin that is loaded with food.
A CAUTION: DO NOT allow children to play with
baskets. Sharp corners on baskets could cause injury.
EGG BOX
Store the egg box on interior shelf, not on door shelf.
A CAUTION: Do not use the egg box as an ice storage
bin in the freezer compartment. The egg box can easily
break if it freezes.
DAIRY BIN
1. To remove the dairy bin, simply lift it and pull straight out.
2. To replace the dairy bin, slide it in above the desired
location and push down until it stops.
23