To replace the crisper cover extension, To remove the deli drawer, Snap-on door rails – Kenmore 2200128 User Manual

Page 19: Drop-in door rails, To remove the rails, To replace the rails, Deli drawer fi.-r. ?-v:c'ctels

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

You can control the amount of humidity in the moisture-
sealed crisper. Adjust the control to any setting between

LOW and HIGH.

■ LOW (open) lets moist air out of the crisper for best

storage of fruits and vegetables with skins.

■ HIGH (closed) keeps moist air in the crisper for best

storage of fresh, leafy vegetables.

Hamitlity Control

men • • • • • • • • u w

In order to prevent food items from falling behind your

crisper, some models have a crisper cover extension that
covers the gap between the back wall and the back side of
the crisper. You may want to remove the extension when
cleaning.

To remove the crisper cover extension:

1. Lift up on the front of the extension.

2.

Pull it off of the supports.

To replace the crisper cover extension:

1. Fit it back onto the supports on the side walls.

2.

Rest the front of the extension on the crisper cover.

Deli Drawer

fi.-r. ?-V:C'Ctels|

The deli drawer provides a convenient place to store

raisins, nuts, spreads, and other small items at normal
refrigerator temperatures.

To remove the deli drawer:

1. Slide the deli drawer straight out to the stop.

2.

Lift the front and slide the drawer out the rest of the

way.

Replace the deli drawer by sliding it back in fully past

the drawer stop.

The door rails may be removed for easier cleaning.

Snap-on Door Rails

To remove the rails:

1. Remove all items from the shelf.

2.

Push in slightly on the front of the bracket while pulling

out on the inside tab.

3.

Repeat these steps for the other end of the rail.

1. Line up the ends of the brackets with the buttons on the

sides of the door liner.

2.

Firmly snap bracket and rail assembly onto the tabs

above the shelf as shown.

Drop-in Door Rails

To remove the rails:

1. Remove all items from the shelf.

2.

Pull straight up on each end of the rail.

To replace the rails:

1. Slide the shelf rail into the slots on the door.

2.

Push the rail straight down until it stops.

19

Advertising