Kenmore OASIS 110.2807 - Manual (Page 13)

Changing Modifiers and Options during the wash cycle
You can change a Modifier or Option anytime before the seiected
Modifier or Option begins. You must:
1. Press STOP once.
2. Seiect the desired Modifiers and/or Options.
3. Press START.
To manually drain the washer and spin the load
1. Press STOP twice to cancei the wash cycie and drain the
washer.
2. Press POWER.
3. Press RiNSE/DRAiN & SPiN.
4. Press 2nd RiNSE.
5. Press START.
When the spin is compiete, the iid uniocks. items can be
removed from the washer.
JCII1»
These iights show which portion of the cycie the washer is
operating. They aiso indicate when you can add other garments
to the wash ioad.
S tatus
Add A Garment #
Soak / Prewash
Wash Ф
Rinse
Spin #
Clothes Clean
Lid Lock @
Clothes Clean
The Ciothes Ciean iight stays on untii the iid is opened or the
Stop or Power button is pressed.
Lid Lock
When the Lid Lock status iight giows, the washer iid is iocked.
NOTE: You must wait untii the Lid Lock iight turns off before the
iid can be opened.
Indicator lights
An indicator iight shows which Cycie, Modifiers, and Options you
have seiected.
Estimated Time Remaining
Cycie time in minutes wiii appear in the dispiay whiie you are
making seiections. The totai cycie time wiii appear, inciuding an
estimated time for drain and fiii times.
.HSffiTUERB«,,,
NOTES:
The time is an estimation oniy and may vary depending on
ioad size, cycie, modifiers, and options seiected.
You may notice the time adjusting during the cycie. This is
normai.
The cycie time may be extended if oversudsing occurs or the
ioad is unbaianced.
Turn the knob to choose the correct wash cycie for the type of
ioad you are washing. When the knob points to a cycie, the
indicator iight for the cycie wiii giow. if the preset cycie setting for
the Modifiers and Options are suitabie for your wash ioad, you
may press START to begin the wash cycie.
Express
Wash
Normai
Heavy
Duty
Bulky/
Bedding
Sheets
Preset Cycle Settings
For ease of use, preset cycie settings provide the recommended
fabric care settings for each cycie.
To use the preset cycle settings:
1. Press POWER.
2. Seiect the cycie you want by turning the knob. The preset
cycie settings wiii be dispiayed (see foiiowing chart).
NOTE: The preset cycie times may vary siightiy depending on
your modei.
3. Press START. The wash cycie wiii begin.
Preset Cycle Settings
Cycle Preset
Minutes Soil Level* Wash/Rinse
Temp
Whitest Whites 79 Heavy Hot/Cold
(No АТС)
Heavy Duty 69 Heavy Hot/Cold
(No АТС)
Normal 41 Normal Warm/Cold
Casual/Wrinkle Free 44 Medium
Light Warm/Cold
Express Wash 33 Light Warm/Warm
Bulky/Bedding 52 Normal Warm/Cold
Sheets 49 Normal Warm/Cold
Colors/Towels 45 Normal Cool/Cold
Delicate/Handwash 36 Light Cool/Cold
Rinse & Spin 24 Not
applicable Cold/Cold
Drain & Spin 14 Not
applicable Not
applicable
Clean Washer 60 Not
applicable Not
applicable
‘Cycie time in minutes wiii appear in the dispiay whiie you are
making seiections. The totai cycie time wiii appear, inciuding an
estimated time for drain and fiii times.
NOTE: Load oniy to the top of the stainiess steei basket.
Overioading can cause poor cieaning. See “Starting Your
Washer.”
13