Inserting bobbin – Kenmore 385.15512 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
• Inserting bobbin
[T] Place a bobbin in the bobbin case making sure
thread feeds clockwise coming from the bobbin.
Draw the thread through the slot of case.
[U Continue to draw the thread under the tension spring and
through the opening
Pull out about 4" (10 cm) of thread .
in Holding latch open, position the bobbin case into the
shuttle and release latch
Case should lock into place when latch is released
22
Advertising