Oiling the machine, Oil behind the face cover, Oil the shuttle area – Kenmore 385.15512 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Oiling the Machine
Oil the points as shown at least once a year
Use good quality sewing machine oil
One or two drops of oil is sufficient. Remove excess oil,
otherwise it may stain fabric
In case machine is not used for an extended time, oil it
before sewing.
NOTE:
Unplug the machine before oiling,
• Oil behind the face cover
Open the face cover and oii points as indicated in illustration.
• Oil the shuttle area
Open the shuttle cover by pulling down the embossed part on
the left side of the cover
Oil the point as indicated in the illustration.,
66
Advertising