Document Outline

• Water Softener
  • ONE YEAR LIMITED WARRANTY ON WATER SOFTENER
  • TEN YEAR LIMITED WARRANTY AGAINST LEAKS
  • This warranty covers only defects in material and workmanship. Sears will NOT pay for:
  • Disclaimer of implied warranties; limitation of remedies
  • Sears, Roebuck and Co., Hoffman Estates, IL 60179 Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8
  • TABLE OF CONTENTS
    • pH
• Questions?
  • Safety Guides
  • Unpack and Check Your Carton
    • INSPECT SHIPMENT
    • PARTS DESCRIPTIONS
  • Plan Your Installation
    • PLAN YOUR INSTALLATION
    • TOOLS NEEDED:
    • WHERE TO INSTALL THE WATER SOFTENER
      • DRAW IN YOUR PIPES AND FITTINGS
      • PIPE, FITTINGS, OTHER MATERIALS NEEDED
    • SOLDERED
    • OUT IN
  • Read Before Beginning Installation
    • BEFORE INSTALLING CHECKS & TESTS
  • Install Single Bypass Valve
    • ASSEMBLE INLET OUTLET ADAPTORS,
    • OR SINGLE BYPASS VALVE
    • FIG. 7
    • FIG. 8
    • BYPASS VALVE:
    • INLET AND OUTLET THREADED ADAPTORS:
    • INSTALLING BYPASS VALVE, AND/OR INLET AND OUTLET THREADED ADAPTORS
  • Install Single Bypass Valve
    • FIG. 10
    • INSTALLING HOLDING CLIPS
    • BYPASS VALVE TURNED DOWNWARD
      • FIG. 12
  • Install 3-Valve Bypass
    • INSTALLING 3 VALVE BYPASS AND PIPES
  • Locate Water Softener and Connect Pipes
    • POSITION SOFTENER INTO PLACE
    • CONNECT THE SOFTENER
    • MOVE SOFTENER INTO PLACE
    • TYPICAL SOLDERING CONNECTIONS
      • FIG. 15
  • Connect Valve and Salt Tank Drains
    • CONNECT THE VALVE DRAIN HOSE
    • CONNECT SALT TANK OVERFLOW TUBING
      • FIG. 16
  • Leak Test
    • LEAK TEST
    • 6. Close both cold water faucets.
    • HOUSE MAIN WATER
    • VALVE BYPASS
      • FIG. 19
  • Electrical Requirements
    • INSTALL GROUNDING CLAMP BETWEEN THE SOFTENER IN AND OUT PIPES
    • COLD WATER PIPE GROUNDING
      • ELECTRICAL POWER OUTLET FOR YOUR SOFTENER
      • PLUG IN THE TRANSFORMER
    • WATER METER JUMPER WIRE
    • CONNECTING TRANSFORMER
  • Install Covers and Restart Water Heater
    • INSTALL COVERS
    • RESTART THE WATER HEATER
    • YOUR PLUMBING INSTALLATION AND ELECTRICAL WORK ARE NOW COMPLETE.
  • Program The Timer
    • PROGRAM THE TIMER
  • Program The Timer
    • SET PRESENT TIME OF DAY
    • FIG. 26
    • SET WATER HARDNESS NUMBER
    • SET REGENERATION TIME
    • 4. Press the SELECT button once again, to com¬
  • Sanitize The Water Softener
    • SANITIZE THE WATER SOFTENER
    • SANITIZE YOUR WATER SOFTENER AS FOLLOWS:
    • You can sanitize the softener with or without salt in the storage tank.
  • Adding Salt To The Storage Tank
    • ADDING SALT TO THE STORAGE TANK
    • WATER SOFTENING SALT WITH IRON REMOVING ADDITIVES
  • Check
    • CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL
  • Faceplate Timer Features
    • EXTRA RECHARGE
    • RECHARGE NOW
      • FIG. 31
    • RECHARGE TONIGHT
    • SALT MONITOR SYSTEM
      • To set this monitor system:
      • FIG. 33
    • ADDING SALT TO STORAGE TANK
  • Faceplate Timer Features
    • OPTIONAL SETTINGS:
    • • SALT EFFICIENCY
    • • CLEAN FEATURE
    • • CLEAN FEATURE MINUTES
    • • MAXIMUM DAYS BETWEEN REGENERATIONS
    • • 97% FEATURE •12/24 HOUR CLOCK
      • California Efficiency Requirement
      • FIG. 35
  • Faceplate Timer Features
    • WATER FLOW THROUGH THE SOFTENER
      • FIG. 37
  • Faceplate Timer Features
    • RECHARGE TIME REMAINING AND VALVE POSITION INDICATORS
    • PROGRAM MEMORY
    • ERROR CODE
      • FIG. 38
      • FIG. 39
    • KENMORE’S ULTRA CLEANSING FEATURE
    • SOFT W/VTER SERVICE AND REGENERATION SERVICE
      • REGENERATION
    • WATER FLOW THROUGH THE SOFTENER IN FILL
      • SOFT W/VTER SERVICE AND REGENERATION
    • WATER FLOW THROUGH THE SOFTENER IN BRINING AND BRINE RINSE
    • WATER FLOW THROUGH THE SOFTENER IN BACKWASH
      • SOFT WATER SERVICE AND REGENERATION AUTOMATIC BYPASS
        • ELECTRONICS
    • WATER FLOW THROUGH THE SOFTENER IN FAST RINSE
      • FIG. 45
      • SALT BRIDGE
      • KEEPING THE W/VTER SOFTENER CLEAN NOZZLE & VENTURI
        • 7. Install and tighten the cap, by hand only. Do not overtighten, which may break the cap or housing.
      • IRON FROM RESIN BED
      • PROTECT THE WATER SOFTENER FROM FREEZING
      • CHECKLIST TO HELP YOU SAVE MONEY
      • BYPASS VALVES
        • FIG. 49
      • MODEL NO. 625.383560 - TIMER CODE S 32
    • FACEPLATE
      • FIG. 51
      • ALWAYS MAKE THESE INITIAL CHECKS FIRST
  • Service Tech Information
    • FIG. 52
    • POSSIBLE PROBLEM
    • CODE
    • PROCEDURE FOR REMOVING ERROR CODE FROM FACEPLATE:
      • MANUAL INITIATED ELECTRONICS DIAGNOSTICS:
      • FIG. 54
    • TROUBLESHOOTING
    • VALVE POSITION INDICATORS:
      • OTHER INFORMATION
      • TIMER PWA REPLACEMENT
      • FIG. 56
    • MANUAL ADVANCE REGENERATION CHECK
      • CYCLE FLOW RATES (GALLONS PER MIN.)
    • ROTARY VALVE SERVICE
    • TO RELIEVE PRESSURE:
    • DISASSEMBLY
    • SERVICING THE VALVE
    • ASSEMBLY
    • W/VTER FLOW THROUGH THE SOFTENER VALVE
      • SERVICE CYCLE
      • FILL CYCLE
    • SERVICE CYCLE
    • BRINING AND BRINE RINSE CYCLE
      • BRINING AND BRINE RINSE CYCLES
    • W/VTER FLOW THROUGH THE SOFTENER VALVE
    • BACKWASH CYCLE
      • BACKWASH CYCLE
      • FAST RINSE CYCLE
    • FAST RINSE CYCLE
    • Kenmore Model No. 625.383560
    • Kenmore Model No. 625.383560
    • Your Home
    • Our Home