Kenmore 100.90002 - Manual (Page 8)

OPERATING YOUR FOOD PROCESSOR
TO SLICE OR SHRED coni.
8 Press IhB ON button, than press down Nghily but firmly on food pusher errcl movabSe loop
to feed items down and onto siice/shred disc When the chute is empty, press OFF, unplug,
allow Ihs disc to stop rolating, and unlatch the food chute iid
7 To process more food, place food Into the food chute and repeat above steps When
finished, press OFF. unplug, and atlow disc to stop rotating
CAUTION:
Before opening the Bowl Cover Assembly, be sure you
have turned the unit OFF and unplugged Ihe coi^.
Open bow! cover by turning clockwise, and remove disc with disc stem.
5
WARNING: Slicing/shredding Disc is vary sharp. Use cauUoti when
handling.
9, Unlock Bowl by turning dockwise towards Unlock icon and lift bow! olf,
Empty the processed food.
FOR JUUENME OR FRENCH FRIES
You can use the julienne or French iry disc with the proce.ssor to make long French fries or
rriBtchstick julienne strips. Both procedures are the same and the size of disc 1s the only
dlfierance - Both require that you process the food twice, or doubis-Biloe if.
Insert any food into food chute horizontally Apply pressure to the pusher while using the
PULSE button until the food is sliced Remove Ihe silces from the work bowl and reassemble
them Reinsert them into the iesd chute with the slices vertical to the disc, wedging them in
tightly. Slice them again
CAUTION: Wake sure unit is turned OFF and unplugged before use.
Never use your hand to push food info processor. The use of heavy
pressure will not speed operation.
1 Lock the Bow! ontrr the Base as described ift Assembly.
2 Slide the disc stem down onto the center post ot the base, then piace either the julienne
or French fry disc onto the disc stem and push down, At this point the disc wii! be at Ihe
top at the bowl.