Kenmore 8907 - Manual (Page 13)

1. Unplug the power cord.
2. Remove two door hinge screws.
3. Lift the door and remove it.
8. Reattach the holder lever.
4. Remove a screw on the Frame Front
5. Remove the two screws on the opposite side of the door
hinge.
6. Remove two screws from the holder lever.
7. Remove a screw from the door hinge.
9. Reattach the screws in the remaing holes.
10. Reinsert the screw in the other hole.
11. Reinsert the screw (Step 4) on the Frame Front
12. Place the door on the other side and reattach it to the dryer.
13
[BETTER]592-89075-02865A-02_EN.indd 13 2011-03-23 ¿AAЬ 9:49:20