Installation spacing for cabinet installation, Mobile home - additional installation requirements, Closet installation – Kenmore 8907 User Manual

Page 7: Only

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Closet installation -

Dryer

only

A. Side view - cioset or confined area

B. Cioset door with vents

* Required spacing

** For side or bottom venting, 2" (5.1 cm) spacing is aiiowed.

Recessed

or closet installation - Dryer on pedestal

A. Recessed area

B. Side view - cioset or confined area

Required spacing

'* For side or bottom venting, 2" (5.1 cm) spacing is aiiowed.

installation spacing for cabinet installation

■ For cabinet instaiiation, with a door, minimum ventiiation

openings in the top of the cabinet are required.

---------

5

^

29.4"

Recommended installation spacing for recessed or closet
installation, with stacked washer and dryer

The dimensions shown are for the recommended spacing.

j

L

Required spacing

6"‘(15.2cm)

5'/i"
(Hen

(2.5 cm)

* Required spacing

** For venting out the side, 2" (5.1 cm) spacing is aiiowed.

Mobile home - additional installation requirements

The instaiiation of the Dryer in mobiie homes must conform to
the Manufactured Home Construction and Safety Standard Titie
24 CFR, Part 32-80 {formeriy the Fédérai Standard for Mobiie

Home Construction and Safety, Titie 24, HUD (Part 280), 1975}

for the United States) or CSA Standards Z240 (for Canada).
When instaiiing a Dryer in a mobiie home, provisions for
anchoring the Dryer to the fioor must be made. Locate an area
that has adequate fresh air.
A minimum of 72 in^ (183 cm^ of unobstructed space is

required.

Ail mobile home installations must be exhausted to the outside
with the exhaust duct termination securely fastened to the

mobile home structure, using materials that will not support
combustion.

The exhaust duct may not terminate underneath the mobile

home.
See Exhausting section for more information.

Mobile home installations require:

■ Metal exhaust system hardware, which is available for

purchase from your local Sears store or Sears Service
Center.

■ Special provisions must be made in mobile homes to

introduce outside air into the dryer. The opening (such as a
nearby window) should be at least twice as large as the dryer
exhaust opening.

' Required spacing

'* For side or bottom venting, 2" (5.1 cm) spacing is allowed.

[BETTER]592-89075-02865A-02_EN.indd 7

2011-03-23 ¿AAЬ 9:49:12

Advertising