Temp selection button, Cycle signal selection button, Wrinkle guard – Kenmore 8907 User Manual

Page 17: Mixed load bell, Rack dry, Start/pause selection button, Adjust time, Power button, Selection, Button

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Temp Selection Button

To select the correct temperature for the load, press the Temp
button. An Indicator light will Illuminate next to the desired
temperature. Press the button repeatedly to scroll through the
settings.

Temperature

Tempèratuie

■ High - For sturdy cottons or those labeled Tumble Dry.

■ Medium - For permanent press, synthetics, lightweight

cottons, or Items labeled Tumble Dry Medium.

■ Low - For heat sensitive Items labeled Tumble Dry Low or

Tumble Dry Warm.

■ Extra Low - Provides the lowest heated dry temperature

possible.

Time

Selection

Button

When using Manual Dry cycles, time can be adjusted by

pressing the time selection button.

During the Sensory Dry cycle, the time light Indicator Is

off

because exact drying times are determined by fluctuating
humidity levels.

Time

Cycle Signal Selection Button

When the cycle Is complete, a chime will sound.

When the Wrinkle Guard option Is selected, the chime will sound

intermittently.

Adjust the volume of the chime or turn it off by pressing the
Signal button.

Press the button repeatedly to scroll through the choices.

Wrinkle Guard

Wrinkle Guard provides approximately 90 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce
wrinkling. Press the Wrinkle Guard button to activate this feature.

The indicator light above the pad will illuminate when Wrinkle

Guard Is selected.

The load Is dry, and can be removed at any time during the
Wrinkle Guard cycle.

Mixed Load Bell

This Is an alarm that notifies the user when the average
dry level Is damp dry

(80%

dried). This Is useful when the

laundry contains various types of clothing you do not want

to dry completely. An alarm sounds for five (5) seconds while
continuing to perform the cycle.

This function can only be selected in the Sensor Dry course, and
the dry level can only be selected from among Normal Dry, More

Dry, and Very Dry.

Mixec

Loac

Bel

Brassée
mixte

Rack Dry

Rack Dry Is available at Time Dry cycle. Temperature will be set

only to Extra Low.

(See

next page for detail.)

When the cycle Is complete, a chime will sound.

When the Wrinkle Guard option Is selected, the chime will sound

intermittently.

Supportile
séchage

Start/Pause selection

Button

Press to pause and restart programs.

Cyde Signal

Signdte programme

Adjust Time

Time can be added or subtracted from the automatically set
times in the Manual Dry cycles (Time Dry, Air Fluff cycles).

To add or subtract time from the cycle, press the Adjust Time
arrow pad up or down until the desired time is displayed.

Timed _

ACydesfl

Adjust^

Timed

VCydesn

Adjust^

AjusL
du temps

Ajust.
dll temps

Start/Pause

Dèiiiarrei/ Pause

r

Wl

Power button

Press once to turn your Dryer on, press again to turn it off.
If your dryer Is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.

Power

Mise en Marche

(!)

V____ y

17

[BETTER]592-89075-02865A-02_EN.indd 17

2011-03-23 ¿AAЬ 9:49:24

Advertising