Installing gas tank heat shield, Installing grease cup, Figure 19 – Kenmore 122.16641900 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing Gas Tank Heat Shield
1. Assemble 2pcs longer gas tank heat shield bracket
A to gas tank heat shields using (2) 5/32 x 3/8” Phillips
head screws with (4) 5/32" lock washers from up to
down (Fig. 16 A)
Figure 17
2. Assemble 2pcs shorter gas tank heat shield bracket
B to gas tank heat shields as above, but assembly
screws need to from down to up, finish preassembly
whole gas tank heat shield (Fig. 16 B).
3. Attach gas tank heat shield bracket A other end to
back panel using (2) 5/32 x 3/8” Phillips head screws
with (4) 5/32" lock washers as shown (Fig. 17)
4. Attach gas tank heat shield bracket B other end to
cart frame using (2) 5/32 x 3/8” Phillips head screws
with (4) 5/32" lock washers as shown (Fig. 18)
Figure 18
Installing grease cup
From the back, pull out grease tray, remove any
packaging materials from it, then replace grease
cup into grease tray as shown in (Fig. 19). Push
grease tray back into grill.
Figure 16
Figure 19
11