Installing grill head, Installing side burner & side shelf, Figure 10 – Kenmore 122.16641900 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installing Grill Head

1. Be sure grill cart doors are closed to stabilize cart.

Remove grill head from carton. Place onto cart from

above as shown in Figure 6.
CAUTION: Grill head is heavy. To avoid injury,
obtain the help of an assistant for this step. Also,

make sure doors remain closed when placing grill
head onto cart. DO NOT open doors until grill head
is securely mounted to cart.

2. Align screw holes of grill head with screw holes of

cart.
3. From back of cart, attach the grill head to the left and

right side (Fig.

7A)

panels using (4) 1/4 x 3/8" Phillips

head screws and (4) 1/4" lock washers.

4. From the front of the cart, attach the front of the grill

head to the left and right side panels (Fig. 7B) using (2)

1/4 X 3/8" Phillips head screws and (2) 1/4" lock

washers

Figure 8

Installing Side Burner & Side Shelf

1. Assemble side shelf & side burner front panel using

(4) 5/32

X

3/8” Phillips head screws with (4) 5/32" lock

washers. (Fig. 8)

2. Remove (1) preinstalled 5/32 x 3/8 Phillips head

screw and (1) 5/32 lock washer from control panel. See

Figure 9 inset.

3. Screw (2) 1/4 x 1/2" Phillips head screws and (2) 1/4"

lock washers into side of grill head as shown. Do not

screw in fully; leave 1/4" extended for shelf assembly.

(Fig. 9)

4. Through side burner shelf screw holes, hang side

burner on two screws. (Fig. 10)

Figure 6

Figure 9

^

f

Figure 10

Figure 7

Advertising