Pioneer SX-209RDS - Manual (Page 10)

DIRECT ACCESS TUNING
LISTENING TO BROADCASTS USING DIRECT ACCESS TUNING
When you know the frequency of the desired station, the fre­
quency can be input directly using the station call (number) but­
tons in the following way:
1. Press the POWER switch to the ON position.
NOTE:
Be sure to turn the TAPE 2 MONITOR button OFF when listening
to AM or FM broadcasts.
2. Select the TUNER function and use the AM/FM
selector to choose either FM or AM.
3. Press the DIRECT ACCESS tuning button.
If you do not perform any operations within five seconds of press­
ing the DIRECT ACCESS button, direct access is canceled.
4. Input the desired station frequency using the sta­
tion call (number) buttons.
Example 1: To receive FM 106.00 MHz
FM 1 LJ b. „
1'// 1
/ 1 r
1
1
Press
/ n IV n 1 /
FM 1 LJ LJ. LJ IV 1 1 r 1
Press the 0 button twice
To cancel frequency input
Direct access is canceled when the DIRECT ACCESS tuning but­
ton is pressed again.
Under the following conditions direct access is canceled:
® If there is no key input for about five seconds after the DIRECT
ACCESS tuning button was pressed.
niRECT
(2) If more than about five seconds elapse between number in­
^DIHECTJ
ACCESS
1 il
put.
1'// 1
. „ II I"
1
■f
Press the DIRECT ACCESS
tuning button.
^DIRECTJ
/ 1'// 1 J ”
FM / M ^ . „ II r 1
Press the 1 button
i n 1'// 1 /
FM j' LJ IV. - . „ / f /■■ 1
Press the 0 button
10
<XRB1008>