Pioneer SX-209RDS User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RDS (Radio Data System) BROADCAST RECEPTION
PI code registration and deletion
To use the EON function, receivable RDS stations must be pro
grammed in the tuner.
When the PI code is registered by operating the memory nor
mally and the same program (PI code) is preset using a different
frequency, this function will be effective for only the stations re
ceived later regardless of the reception state.
When presetting new frequencies due to relocation to another
area, etc., there is a need to delete the registered PI codes.
Perform the following procedure.
1. Press the EON MODE button for two seconds or
more.
"ERASE PI" will be displayed.
2. Within 2 seconds, press the MEMORY button.
EON TA and News Operation
During FM broadcast reception, press the EON MODE button so
that "EON TA" is displayed and the EON mode indicator lights
up.
When the EON MODE button is pressed another time, "EON
NEWS" is displayed and the EON MODE indicator lights up.
When traffic information (TA) is received, the frequency will
change automatically and the EON indicator will flash.
When the traffic information has ended, the input function re
turns to the original function, that is, to the tuner reception if it
has been TUNER or to another function if it has been other than
TUNER. During this process, the EON indicator keeps on lighting
continuously to wait for another interrupt.
Display will return to what it was before input (waiting for inter
rupt).
The same operations are performed when a NEWS program is
requested.
NOTES:
• If reception does not occur. "FALSE" will be displayed and then
it will wait for an interrupt.
• To cancel, press the EON MODE button.
• Simultaneous request waiting for traffic information (TA) and
News programs not possible.
16
<XRB1008>