Pioneer SX-209RDS - Manual (Page 18)

1. Press the POWER switch to the ON position. Also
turn on the power to the stereo components you
wish to use.
2. Use the function buttons and TAPE 2 MONITOR
button as appropriate to select the desired pro­
gram source.
3. Operate the appropriate stereo component to
play back the program source.
You can record an FM or AM broadcast, or a sound source con­
nected to the LD/DVD, CD, PHONO terminals.
1. Press the POWER switch to the ON position.
2. Select the sound source to be recorded.
3. Operate the cassette deck connected to the TAPE
1/VCR or TAPE 2 MONITOR terminals.
4. Turn on (or start) the sound source to be recorded.
• For details of operating the cassette deck, read the operating
instructions of the cassette deck.
COPYING TAPES
When two cassette decks are used, the sound played back on the
deck connected to the TAPE 1A/CR jacks can be recorded on the
deck connected to the TAPE 2 MONITOR jacks.
To make a tape copy with contents identical to the original
tape.
To edit a recording of an FM broadcast in order to cut out un­
wanted commercials, recording only the desired material onto
another tape.
TAPE 1A/CR
> --------------- V
PLAYBACK
~ o o o 6
B -
O o o o’-S^ . I I---- 0=6 J o" 6=6 ifi! liR jili
mm
I —' u—u
TAPE 2
RECORDING Z
[When using two cassette decks]
1. Load the playback tape (i.e. the pre-recorded tape)
in the deck connected to the TAPE 1/VCR jacks,
and the tape to be recorded in the other deck con­
nected to the TAPE 2 MONITOR jacks.
2. Press the TAPE 1/VCR button.
3. Operate the cassette decks to begin copying.
Set the cassette deck with the non-recorded tape to the record­
ing mode and set the cassette deck with the original tape to the
playback mode.
18
<XRB1008>