Rear panel facilities – Pioneer SX-209RDS User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REAR PANEL FACILITIES
® FM/AM ANTENNA terminals
©PHONO jacks
Connect to the output cables from a turntable.
(DGND terminal
Connect to the ground lead of a turntable.
Use a screwdriver to connect with the ground terminal.
NOTE:
This is used to decrease noise and does not serve as a complete
ground.
©TAPE 2 MONITOR jacks
Connect these jacks to the cassette deck.
©TAPE 1/VCR jacks
Connect these jacks to the cassette deck or video cassette recorder.
©LD/DVD jacks
® CD input jacks
©CONTROL OUT jacks
Connects this jack to the control input jack of an unit attached HI
mark using a commercially available cord with mini-plugs (with
out load).
Outputs the remote control signal to another unit from this unit
or the relay signal from the control input jack.
To the CONTROL
IN jack of other
component.
Receiver
Pioneer component
bearing the ^ mark.
Remote control
unit
©SPEAKERS terminals
A; Connect to a first set of speakers.
B; Connect to a second set of speakers.
) Power cord
<XRB1008>