Kenmore 790.4809 - Manual (Page 13)

Setting Oven Controls
Important Things to Know Before Setting any Basic Oven Cooking Function
This appliance has been factory pre-set to start any BAKE, CONV BAKE, CONV ROAST, PREHEAT, CAKES or BREADS
function with the oven set temperature automatically set for 350°F. However if desired, the oven set temperature may be
adjusted at any time during the cooking process. You may also choose to add
a
COOK TIME or DELAY START with any of
the functions listed above.
Temperature Visual Display
Your oven is equipped with
a
temperature visual display. When
a
cooking mode is set, the actual temperature will be shown
in the display and will rise as the unit preheat. When the unit has reached its target temperature,
a
chime will sound to re­
mind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake, convec­
tion roast, cakes and breads. NOTE: The lowest temperature that can be displayed is 100°F.
Using the AirGuard feature (some models)
Your appliance is equipped with
a
catalytic oven exhaust cleaner that may be turned on during any cooking process. This
feature helps remove smoke and eliminates 85% of the odors generated when using your oven. DO NOT use AirGuard when
baking delicate bakery items.
. , . Air^
If you wish to have AirGuard clean the oven exhaust once cooking has started, press Guard .
Note: The AirGuard indicator light will glow anytime AirGuard is active. AirGuard will automatically turn on and cannot be
manually turned off during the Self-Cleaning cycle.
Setting Bake
The BAKE
E3
pad controls normal baking. If preheating is necessary, refer to the
Heat
Preheat Feature for instructions. The
oven can be programmed to bake at any temperature from 170° F to 550° F (the sample shown below is for 350°F).
INSTRUCTIONS PRESS DISPLAY
To set the Bake Temperature to 350°F
1. Arrange interior oven racks and place food in oven.
2. Press L!ilJ, 350 will automatically appear in the display (Fig. 1).
3. Press V_y. The actual temperature will be displayed (Fig.2). A long
beep will sound once the oven set temperature reaches 350°F and
the display will show 350 and BAKE (Fig. 3).
Note: Pressing '—7 will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing from
350°F to 425°F)
1. After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press Q (Fig.
4).
2. Press 4 2 5 (Fig. 5). 425° will appear in the display.
3. Press ©.
4. The oven is now set for 425°F.
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster. The
Bake, Broil and Convection elements will also cycle for
a
better heat
distribution.
B
B
425
I.
1- ,
jn
Du 350
BAKE
Fig. 1
□
I.
1-,
Dn
Du
inn
lUU
BAKE
Fig. 2
□
1­
1-,
jn
Du 350
BAKE
Fig. 3
□
1­
1-,
in
Du 350
BAKE
Fig. 4
□
1-,
1-,
in
Du Has
BAKE
Fig. 5
13