Self-clean cycle time length, J-uu <-ln, Lon n „ l-ju <-ln – Kenmore 790.4809 User Manual

Page 28: Uu »-ln, On n „ l-ju *-<-n, Seif cleaning, D-nn r, Nn n, Ik caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Seif Cleaning

Self-Clean Cycle Time Length

Flex

^

^

Delay

The

Clean

pad controls the Self-Cleaning feature. When used with

a

the

start

pad,

a

delayed Self-Cleaning cycle may also be programmed. The Flex Clean feature

allows for any Self-Cleaning cycle time from 2 (2:00) to 4 hours (4:00). You may

also choose the clean time in 1 minute increments (for example 2 hours and 50

minutes) by pressing the number keypads 2 5 0.

If you are planning to use the oven directly after a self-clean cycle remember to

allow time for the oven to cool down and the oven door to unlock. This normally

takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours

to complete.

*lt is recommend to use a 2 hour self-clean cycle for light soils,

a

3 hour cycle for

average soils, and

a

4 hour cycle for heavy soils (to assure satisfactory results).

ik CAUTION

To avoid possible burns

use care when opening the oven door

after the Self-Cleaning cycle. Stand

to the side of the oven when opening

the door to allow hot air or steam to

escape.

ik CAUTION

DO NOT force the

oven door open. This can damage

the automatic door locking system.

Use caution and avoid possible burns

when opening the door after the Self­

Cleaning cycle has completed. The

oven may still be VERY HOT.

INSTRUCTIONS

PRESS

DISPLAY

To start an immediate Self-Cleaning cycle or to set a Delay

Start time of 9:00 o’clock and shut-off automatically (example

provided is

a

default 3 hour Self-Clean cycle)

1. Be sure the clock is set with the correct time of day, the oven is

EMPTY and the oven door is closed.

Flex ,,

,,

,,

,,

2. Press

Clean.

"CLEAN" will flash and "3:00" HR will show in the

display (Fig. 1). The control will automatically clean for a 3 hour

period (default self-cleaning cycle time). Note: If a 2 or 4 hour

clean time is desired, press 2 0 0 for 2 hour or press 4 0 0 for

a

4 hour clean time. Set the cleaning time based on the amount of

soil: light, medium or heavy (* See above).

3. Press ©. The "DOOR LOCKED" icon will flash (Fig. 2).

4. The motor driven oven door lock will begin to close automatically.

Once the door has been locked the "DOOR LOCKED" indicator

light will stop flashing and remain on (Fig. 3).

Note: Allow about 15 seconds for the oven door lock to close.

Note: If the optional delay Self-Clean feature is needed, finish steps

5-7. If Self-Clean is started immediately skip the remaining steps and

continue with "When the Self-Clean cycle is done" on the following

page.

Delay ^

^

...

5. Press

Start

(Fig. 4). Enter the desired Self-Clean starting time using

the number pads 9 0 0 (Fig. 5).

6.

Press ©. "DELAY", "DOOR LOCKED", "CLEAN" and Cooktop

locked icons will remain on.

7. The control will calculate forward from the set start time to

determine when the Self-Cleaning cycle should end. The Self­

Cleaning cycle will turn on automatically at the set time. At that

time the icon "DELAY" will go out; the oven icon will come on, the

start time, "CLEAN" and "CLn" will remain in the display (Fig.

6

)

D-nn r. „

J-UU <-Ln

Fig. 1

Fiex

Clean

lOn

n

l-JU <-Ln

!

2 0 0 or 4 0 0

DOOR LOCKED CLEAN

©

. J |.'3u

LÍ-n

DOOR LOCKED CLEAN

Fig. 3

Fig. 4

■ nn n „

■UU »-Ln

Fig. 5

Delay

Start

900

• on n „

l-JU *-<-n

DOOR LOCKED CLEAN

Fig.

6

28

Advertising
This manual is related to the following products: