Line level connection (0) – Pioneer S-W250S-W User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before making or changing any connections, switch
off the power and disconnect both this unit and the
amplifier/receiver from the AC outlet.

LINE LEVEL CONNECTION (0)

This connection is for a stereo amplifier or receiver equipped

with a SUBWOOFER PRE-OUT terminal. If the stereo amplifier

or

receiver

is

not

equipped

with

a

SUBWOOFER

PRE-OUT

terminal, carry out a Speaker Level connection. Connect to the

LINE LEVEL INPUT terminal on this unit, using the specially

provided RCA plug cord.

NOTES:

When connected to the PRE-OUT terminal for surround center

channel on the stereo amplifier or receiver, the bass Is heard
only on the center channel, so it will be insufficient.

SPEAKER LEVEL CONNECTION ([g)

This is a connection to the speaker terminals on the stereo

amplifier or receiver.

NOTES:

When the power of the stereo amplifier is turned off before the

power of this unit Is switched off, a shock sound may be
generated. In this case, lower the subwoofer volume or turn off

the power of this unit. If the stereo amplifier has a switched

outlet, connect the power cable of this unit to this outlet.

When the subwoofer volume is set to an extremely high level,

howling may be caused when the power of the stereo amplifier
is turned off or when the speaker switch is turned on. To prevent

this, lower the subwoofer volume or turn off the power of this
unit before turning off the power of the stereo amplifier. Also,
when using this unit at a high level, do not turn off the speaker

switch of the stereo amplifier.

Do not turn up the bass on the stereo amplifier or receiver. If

the stereo amplifier or receiver has no output margin, sound

distortion is apt to occur. Adjust the bass level with the unit's

VOLUME knob.

When the LINE LEVEL INPUT terminal Is connected, the

SPEAKER LEVEL INPUT terminals cannot be used.

Avant d'effectuer ou de changer les raccordements,

mettre hors tension et débrancher cet appareil et
l'amplificateur ou l'ampli-tuner au niveau de la prise

secteur.

RACCORDEMENT DE NIVEAU LIGNE (0)

Raccordement

à

effectuer

lorsque

l'ampli-tuner

ou

l'amplificateur

stéréo

est

équipé

d'une

borne

de

sortie

SUBWOOFER

PRE-OUT.

Si

l'ampli-tuner

ou

l'amplificateur

stéréo

n'est

pas

équipé

d'une

borne

de

sortie

SUBWOOFER

PRE-OUT, faire un raccordement de niveau haut-parleur. Relier

cette borne à la borne d'entrée de niveau de ligne (LINE LEVEL

INPUT) du subwoofer à l'aide du câble à prise RCA fourni.

REMARQUE:

• En cas de raccordement à la borne PRE-OUT de Tampli-tuner ou

de l'amplificateur stéréo pour effet d'ambiophonie par la voie
centrale, les sons graves ne seront perçus que sur la voie
centrale, ce qui est insuffisant.

RACCORDEMENT DE NIVEAU DE HAUT-PARLEUR ([g)

Il s'agit du raccordement aux bornes de haut-parleur d'un ampli-

tuner ou d'un amplificateur stéréo.

REMARQUES:

• Lorsque l'amplificateur stéréo est mis hors tension avant le

subwoofer. Il peut se produire un bruit de choc. Dans ce cas,
baisser le volume du subwoofer ou le mettre hors tension. SI
l'amplificateur stéréo est équipé d'une prise de sortie
d'alimentation CA commutée, brancher le cordon d'alimentation
du subwoofer à cette prise.

• Si le volume du subwoofer est réglé à un niveau très élevé, un

hurlement peut se produire lorsque l'alimentation de
l'amplificateur stéréo est coupée ou que l'interrupteur de haut-

parleur est activé. Pour éviter ceci, abaisser le volume du
subwoofer ou couper l'alimentation de cet appareil avant de

mettre l'amplificateur stéréo hors tension. De même, si cet

appareil est utilisé à un niveau élevé, ne pas désactiver

l'Interrupteur de haut-parleur de l'amplificateur stéréo.

• Ne pas augmenter les graves sur Tampli-tuner ou l'amplificateur

stéréo. Si Tampli-tuner ou l'amplificateur stéréo n 'a pas de marge
de sortie, le son pourrait être déformé. Régler le volume des
graves au moyen du bouton de réglage du volume (VOLUME)
du subwoofer.

• Lorsque la borne d'entrée de niveau de ligne (LINE LEVEL INPUT)

est connectée, les bornes d'entrée de niveau haut-parleur
(SPEAKER LEVEL INPUT) ne peuvent pas être utilisées.

9

En/Fr

Advertising