Connecting the power cord (2), Connecting the system – Pioneer AVIC50S User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the System
Connecting the power cord (2)
Mobile Navigation Unit
AVIC-505
Power cord
Black
j
Note: When replacing the fuse, be
sure to use only a fuse of the rating
prescribed on the fuse holder.
2
Yellow
Fuse holder (6 A)
Red
Fuse resistor
c
Fuse resistor
Note:
Cords for this product and those for other products
may be different colors even if they have the same
function. When connecting this product to another
product, refer to the supplied Installation manuals
of both products and connect cords that have the
same function.
GROUND
To vehicle (metal) body. To keep electromagnetic noise
from the vehicle body out of the mobile navigation system,
attach this lead near the main unit.
Note: The yellow, red, and orange leads should be
connected to the opposite side of the 1‘uscbox terminals
from the battery.
+ Battery
To the terminal always supplied with power regardless of
ignition switch position.
ACC
To the electric terminal controlled by the ignition switch
(12 V DC) ON/OFF.
Do not connect this lead to power source terminals to
which power is continuously supplied. If the lead is
connected to such terminals, the battery may be drained.
Orange ILL
To lighting switch terminal.
Yellow/Black, PurpleAVhite, Pink, Blue/Yellow
Oy See pages 7-8.