After installing the unit – Pioneer AVIC50S User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
After installing the unit
1. Reconnecting the battery.
First, double-check that all connections are correct and that the unit is installed correctly.
Reassemble all vehiele components that you previously removed. Then reeonnect the neg
ative (-) cable to the negative (-) terminal of the battery.
2. Start the engine.
3. Press the reset button on the main unit.
Press the reset button on the main unit using a pointed object such as the point of a pen.
Reset button
4. Set the mobile navigation system.
Set the mobile navigation system as explained in the Owner’s manual.
Advertising
This manual is related to the following products: