Bosch KGV36610 - Manual (Page 25)

en
Switching ON/OFF the appliance
Switching on the appliance
Press button (Fig. ©/1). +4°C temperature
lamp blinks.
The appliance begins to cool, the interior
light switches on when the door is opened.
Selecting the temperature
The refrigerator compartment temperature is
set in the factory to +4 °C.
The set values can be changed, see
description of the control panel:
2 Temperature adjustment button.
We recommend a setting of +4 °C
Perishable food should not be stored
warmer than +4 °C.
Operating tips
• The sides of the shousing are sometimes
heated slightly. This prevents
condentasation in the area of the door
seal.
• While the refrigerating unit is runnig,
beads of water or fost form on the rear
of the refrigerator compartment. It is not
necessary to scrape off the frost or wipe
off the beads of water. The rr panel
defrosts automatically.
The condensation is conveyed 9/B down
the drainage channel. Fig ©/B to the
refrigerating unit where it evaporates.
• If the air humidity is high, condensation
may form in the refrigerator
compartment, especially on the glass
shelves. If this is the case, pack or wrap
the food and select a lower temperature
in the refrigerator compartment.
• If you cannot open the freezer
compartment door immediately after
closing it, wait 2-3 minutes until the
partial vacuum has equalised.
• The refrigeration system may cause
several areas of the freezer shelves to
frost quickly. This does not affect
function or power consumption.
The appliance does not require
defrosting until the entire surface of the
freezer shelf is covered with more than 5
mm of frost or ice.
Switching off the appliance
Press button, (Fig. ©/1).
Temperature lamp, (Fig. ©/a), goes out,
refrigeration and light switch off.
Disconnecting the
appliance
If the appliance is not to be used for a
prolonged period, pull out the mains plug,
clean the appliance and leave the doors
open.
25