Sharp Aquos LC 42D43U - Manual (Page 27)

Basic adjustment settings
:Pfetu-f'^-aaiuStirtieri^ ■;
Adjusts the picture to your preference with the
following picture settings.
1
2
3
4
Press MENU to display the MENU screen, and
then press to select "Picture”.
Press A/T to select a specific adjustment
item.
Press to adjust the item to the desired
level.
Press MENU to exit.
For resetting all Picture adjustment Items to the factory
preset values, press to select “Reset”, press ENTER,
press -4/^ to select "Yes”, and then press ENTER.
Selected .......... -ilbutioh : : : : : : : : j»: bUttOh.'
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more brightness
Color For less color
intensity For more color
intensity
Tint Skin tones become
reddish
Skin tones become
greenish
Sharpness For less sharpness For more sharpness
Select “Advanced" and then press ENTER to set “Color
Temp.”, “Black", “l/P Setting”, "Film Mode", "3D-Y/C”,
“Monochrome” or “Range of OPG”. See page 27.
tjOPCsettingjA-hti;.
Autrrm.alically adjusts the brightness of the screen.
i:' Press MENU to display the MENU screen, and
men press to select “Picture”.
Press a /T to select “OPG”.
Press Af>- to select “On” or "On: Display”.
■Selecteclltern
Off
On
On: Display
Pescriptfon-.
The brightness is fixed at the value set in
“Backlight”.
Automatically adjusts
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
Press MENU to exit.
» When set to “On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
» When set to “On: Display”, OPC effect displays on the
screen while the OPC adjusts the screen isrightness.
26