Sharp Aquos LC 42D43U - Manual (Page 48)

Other viewing options
:Fr^ee:?ingji^;ag^^
Allows you to capture and freeze a moving Image that
you are watching.
Press FREEZE
« A moving Image is captured.
Press FREEZE again to cancel the function.
yPresetting;-remiot^-ic
You can operate the connected AV products (AV
Receiver, Gable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function of your
remote controi unit.
When this function Is not available, “No displaying stiii
image available.” will display.
The still Image automatically goes out after 30 minutes,
if you are using the freeze functloti and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
cancelled and a V-CHIP BLOCK message will appear.
Presetting manufacturer codes
1
Press FUNCTION until the LED for your
device lights up.
After the LED for your device iights up, press
FUNCTION and DISPLAY at the same time
to enter the code registration mode. The LED
will blink.
Press 0-9 to enter the manufacturer code. (See
page 48.)
* Preset mode Is finished once the LED no longer
iights up.
After registering the code, the LED will stop
blinking then turn off after one second. (If you
perform an incorrect operation, the LED will
blink quickly then turn off.)
47