Combi Centre DX 8074 - Manual (Page 9)

15 Section 6 - Securing Infant in Car Seat 16 Section 6 - Securing Infant in Car Seat
Non-Adjustable Headrest Models
If the height of the shoulder straps needs
adjusting, turn the car seat over and detach
the straps from the steel connector plate.
Reposition the straps as required and
reattach the straps.
Place harness straps over infants shoulders
and thighs, and secure the Harness Buckle.
The harness must be a snug (not loose) fit on
the infant.
A snug strap should not allow any slack. It lies
in a relatively straight line without sagging. It
does not press the infant's body into an
unnatural position.
To increase the tension of the harness, pull the
harness adjuster strap IMPORTANT: Check that the shoulder straps
are securely attached to the connector plate.
Straps must not be twisted!
IMPORTANT: You should hear a "click" as the
buckle tongues engage.
"CLICK"