Caterpillar TAURUS 70 - Manual (Page 8)

Turbomachinery Package Specification Taurus 70 Compressor Set and Mechanical Drive
• Ancillary air inlet system
• Ancillary exhaust system
• Package enclosure (if specified) with:
− Ventilation system
− Fire detection and suppression system
− Combustible gas detection
2.2.1 Package Electrical System
The onskid package electrical system can be furnished to meet the following certification
requirements:
• National Electrical Code (NEC)
• Canadian Electrical Code (CEC)
• Conformité Européenne (CE) Mark (includes compliance to the ATEX directive)
• European Committee for Electrotechnical Standardization (CENELEC)
When supplied, the off-skid control console, variable frequency drives, and battery
charger are not approved for hazardous duty areas and must be installed in a
nonhazardous area.
Three-Phase Motor Voltage
All three-phase motors and three-phase electrical components have the same voltage
rating. Motor starters and contactors are not provided.
2.2.2 Service Connections
The Taurus 70 Mechanical Drive is supplied with self-contained systems for starting, fuel,
lube oil and control. All service connections (Figure 2) are conveniently located on the
outer edge of the skid.
Figure 2. Typical Taurus 70 Mechanical Drive Service Connections
© 2009 Solar Turbines Incorporated. All rights reserved. TPS70CSMD/309
7