К v .к isinq соан (rf, Oposite video – Vizio VX32L User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VX32L HDTV10A User Manual
a.4 Connectinq Your Ba=Jc; Set'-Top Вок
’
. Isif ' I
f
oposite Video
ир?И
1
I min ND№
2
1.
Turn off the power to the HDTV and Set-Top Box.
2.
Using the AV Cable, connect the Video (yellow
color) connector on your Set-Top Box to the
corresponding Video (yellow color) connector in
the AV2 group (yellow color area) at the rear of
the HDTV,
3.
Using the white and red connectors, connect the
cable to the audio output connectors associated
with the Video output on your Set-Top Box and v ;■
connect the other end to the audio connectors
associated with the AV2 input (yellow color area) at the rear of the HDTV,
4.
Turn on the power to the HDTV and Set-Top Box,
5.
Select AV2 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
К V .к isinq Соан (RF|
HOMt 1
(S
_
•
НРШ1
e 1
1.
2.
3.
4.
Turn off the power to the HDTV and Set-Top Box.
Using a Coax (RF) cable, connect one end to the TV OUT (RF)
on your Set Top Box and the other end to the DTV/TV input at
the rear of the HDTV.
Turn on the power to the HDTV and Set-Top Box.
Select TV using the INPUT button on the remote or side
of the HDTV, or directly by pressing the TV button ^
(below the WIDE button) on the Remote Control,
Note: Refer to your Set Top Box user manual for more mformation
about select ng the video or RF output of the product.
Version 3/13/2007
18
0