Itrast – Vizio VX32L User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VX32L HDTV10A User Manual
P ' '
\ 'A i';} A i
leSE-j
Press the button to highlight the Brightness selection.
Press the||p|button to start adjusting the brightness and the menu page wi
a small Brightness Indicator Bar so
available levels. Use the or Q
disappear and be replaced by
you can see the brightness level between the minimum and maximum
button to adjust the level.
The Brightness adjusts the black levels in the picture. If the brightness is too low you will not be able to
see the detail in darker parts of the picture and if the brightness is too high the picture will look washed
out.
itrast
Press the button to highlight the Contrast selection.
Press the(|| button to start adjusting the contrast and the menu page will disappear and be replaced by a
small Contrast Indicator Bar so vou can see the contrast level between the minimum and maximum
available levels. Use the (El Q button to adjust the level.
The Contrast adjusts the white levels in the picture. If the contrast is too low the picture will look washed
out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture.
□r
Press the button to highlight the Color selection.
Press the|J button to start adjusting the color and the menu page will disappear and be replaced by a
small Color Indicator Bar so you can see the color level between the minimum and maximum available
levels. Use the or button to adjust the level.
The Color adjusts the amount of color in the picture.
int"
Press the button to highlight the Tint selection.
Press the J|button to start adjusting the tint and the menu page will disappear and be replaced by a small
Tint Indicator Bar so you can see the tint adjustment to the left or right of the nominal position.
Use the or button to adjust the level.
The Tint adjusts the hue of the picture. The easiest way to set tint is to look at flesh tones and adjust for
a realistic appearance. In most cases, the default middle position is correct. If people’s faces look too
orange try reducing the level of color first as the case of this is often too much color
Version 3/13/2007
31
0