J - /q isif <5 i i<nposlte (hu) uideo – Vizio VX32L User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'3.5-3 Usinq S"Vicieo (HUx]
Connectrinq your DULi i^layer (
VIZIO VX32L HDTV10A User Manual
1.
Turn off the power to the HDTV and DVD
player.
2.
Connect the S-Video jack on the rear of
your DVD player to the S-Video jack in
the AV1 group on the side of the HDTV.
3.
Connect an audio cable (white and red
connectors) to the audio output
connectors associated with the S-Video ,
■ ,
--------------- -—.
output on your DVD player and connect '
the other end to the audio connectors associated with the AV1 input on the side of the HDTV.
4.
Turn on the power to the HDTV and DVD player.
5.
Select AV1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
j - /q isif <5 i i<nposlte (HU) Uideo
1
.
2
.
3.
4.
5.
Turn off the power to the HDTV and DVD
player.
Connect the Video (yellow color) connector on
your DVD player to the Video (yellow color)
connector in the AV2 group (yellow color area).
Connect the R (red color) and L (white color)
audio connectors on your DVD player to the
corresponding R (red color) and L (white color)
.........
audio input connectors in the AV2 group
(yellow color area).
' '
..................
Turn on the power to the HDTV and DVD Player.
Select AV2 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
ft)
Note:
f :■ fvg)f
;tttb:)f
Version 3/13/2007
You may use the AVI input on the side 4 you vv-sh. as long
as you are not already usmg it for tne S-Video input.
Refer to your DVD player usei' manual for more information
about the video output requirements of tne product.
21
0