A watchinc ^ ^ i¡ < aqram, Í -ícj'iu'stiní. í vìsic hf ^ '> w »! nqs, Í -ícj'iu'stiní. í vìsic hf – Vizio VX32L User Manual
Page 27: W »! nqs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VX32L HDTV10A User Manual
3.a Watchinc ^ ^ i¡ < aqram
Before you start watching TV, please make sure that any cable, satellite or off-air antenna connections
are secure. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge
protector.
1
.
2
.
Press the power button on the remote or on the side of the HDTV. The VIZIO logo on the
front will change from orange to white.
There are 3 options for selecting your programming:
a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA
input, you can select TV directly by pressing the TV button on the remote, or by pressing
the INPUT button on the remote or on the side of the HDTV.
b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by
pressing the INPUT button on the remote or on the side of the HDTV.
c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component directly by pressing the Component button
on the remote, or by pressing the INPUT button on the remote or on the side of the HDTV.
r
''N
Note: You should be able to see a picture. If you do
make sure that ail of the HDTV connections are secureiand
you have selected the correct vdeo input source. :?:?:?:?
3. When using option 2a, press the Channel buttons on the remote or the
+i-
buttons on the side
of the HDTV to change the channel. Note; The Channel buttons, on the side of the HDTV
and on the remote, control will not m'ork if you are watching a program using HDiM!,
Component and AV inputs.
: : Í -ícJ'iu'stiní. Í vìsic Hf ^
'>
w »! nqs
Volume
To increase the volume, press and hold the VOL+ or VOL- button on the side of the LCD HDTV or remote
control until the desired level is reached.
TV Channels
To step up or down through the available TV channels, press the CH+ or CH- button on the side of the
HDTV or remote control once for the next or previous channel, or hold it depressed until the desired
channel is reached. Note: Channel up and down will only operate in DTV and TV modes.
Wide
Using this feature, you can watch video content in different size modes on the HDTV. Press the WIDE
button on the remote control to switch among the modes.
Fore more information see Section 4.17,1 - Viewing Modes, on page 46,
Version 3/13/2007
27
o