I i ( i itileshootlnq guide – Vizio VX32L User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VX32L HDTV10A User Manual
^ i i ( i itileshootlnq Guide
If the TV fails or the performance changes dramatically, check the display in accordance with the
following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the
display still fails to perform as expected, contact the VIZIO for assistance by calling 1-(949) 428-2525 or
e-mail us at techsupport@vinc,com.
Problem
SolJtiO'’
No power. :
: Make sure the power button is ON (White VIZIO Logo),
i Make sure AC power cord is securely connected to the AC socket.
: Plug another electrical device (like a radio) to the power outlet to verify that the
: outlet is supplying the proper voltage.
No sound. :
i Check your audio connection
: Press MUTE on the remote control, so that mute symbol disappears from the screen
: Check your audio settings, your TV audio may be set to SAP, min or speakers off
i Press the Volume + (Up) key on your remote control
: Make sure that headphones are not connected
If the screen is black. :
: Check your input connections.
Power is ON but no screen ;
image. :
: Make sure the video cable supplied with the TV is secured to the correct video
; output port on the back of the VCR and the TV. Make any cable you have attached
: to the TV is secured to the correct output your Set-Top Box, DVD, etc.
i Adjust brightness and contrast.
I Check Source settings.
Wrong or abnormal colors :
appear. :
i If any colors (red, green, or blue) are missing, check the video cable to make sure it
I is secureiy connected.
Control buttons do not work, i
: Press only one button at a time.
Remote Control does not i
work. :
i Make sure batteries are inserted correctly
: Batteries could be weak.
There appears to be image ;
quality issues. :
; For best image quality, view HD wide screen programs where possible. If HD
: content is not available view “Standard Definition” from a digital source. Standard,
i analog TV will always be noticeably inferior to HD because your digital flat panel TV
: has video that is many times better than old TV’s and so you can see interference
: and deficiencies you did not know you had.
You cannot see a picture. :
i Make sure that the power cord is plugged into a grounded electrical outlet.
I Make sure that the power button is turned on.
: Make sure that the selected input source is connected to a working input source.
i If your TV is connected to your computer in RGB or HDMI mode, press any key on
: your keyboard to “wake” your computer.
You see a distorted picture or :
hear unusual sound. i
: You may be getting interference from electrical appliances, cars, motorcycles, or
i fluorescent lights. If you have not mounted it on the wall, try moving your TV to
: another location to see if this is the cause of the problem.
The picture has abnormal ■
patterns. :
: Make sure that the input source cable is attached securely and correctly to the back
i of your TV.
I Make sure that the video input source is within the range of your TV. Compare the
: video input source’s specifications with your TV specifications.
The display image does not i
cover the entire screen. ;
i If you are using RGB mode, make sure that H Size and V Position in the On Screen
I Display (OSD) are set correctly.
Version 3/13/2007
49
0