Vizio VF550M User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VF550M User Manual
Using Component Video (Better)
Y
Pb.'Cb Pr/Cr
------AUDIO--------
L R
( #)
( # J
(•)
COMPONENT 1
1.
Turn off the power to the HDTV and DVD player.
2.
Connect the component cable (green, blue, and red) from your DVD player to an available
set of
COMPONENT
jacks on the back or side of your HDTV.
3.
Connect the audio cables (white and red) from your DVD player to the
COMPONENT L
and
R AUDIO
jacks on the back or side of your HDTV.
4.
Turn on the power to the HDTV and DVD player.
5.
Select
Component 1
using the
INPUT
button on the remote or side of the HDTV, or directly
by pressing the
COMP
button on the Remote Control.
Note: You can also connect the DVD player to the Component 2 connections on the side of the TV. If
using Component 2, press the
COMP
button until Component 2 is selected.
Using S-Video (Better)
S-VIDEO/AV1
S-VIDEO
— AUDIO
R
•
1.
Turn off the power to the HDTV and DVD player.
2.
Connect the S-VIDEC cable from your DVD player to the
S-VIDEO
jack on the back of your
HDTV.
3.
Using an audio cable, connect the cable to the audio output connectors associated with the
S-Video output on your DVD player and connect the other end to the audio connectors
associated with the AV1 input at the rear of the HDTV.
4.
Turn on the power to the HDTV and DVD player.
5.
Select AV1 using the
INPUT
button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
20