Vizio VF550M - Manual (Page 38)

VIZIO VF550M User Manual
.rv
Menu
If Initial Setup was cancelled when you first used your HDTV, or setup has changed (such as switching
from Antenna to Cable), channels can be scanned using the TV TUNER setup menu.
1. Press the MENU button on the remote control or the side of the TV and the Picture menu will be
shown on the screen.
2. Press either A or T on the remote control or CH A or CH T on the side of the HDTV to highlight
the TV menu.
3. Press the MENU button to select.
4. Press either A or T on the remote control or CH A or CH T on the side of the HDTV to select a TV
menu option.
5. Once the menu option is highlighted, press either ◄ or ► on the remote
control or VOL + or VOL - on the side of the HDTV to adjust the setting.
6. Press the LAST key once to return to the previous screen or repeatedly to
return to your program if the task has been completed.
TV menu options:
Tuner Mode
Select Cable or Air (Antenna) depending upon
attached to the DTV / TV Input. which equipment you have
Auto Search
Automatically search for TV channels that are available in your area. The TV
will search for analog and digital channels.
Partial Channel Search
If channels are missing after the auto search process, a partial channel search
can be performed within a specified channel range. Select to scan for Analog,
Digital, or both Analog/Digital channels, then press the
T button to highlight
the “To” and “From” selection. Press the ► button to select the range of
channel numbers you want to start searching in. Press MENU to start channel
search.
Skip Channel
After the TV has stored all of the available channels in memory, channels may
be removed. Press the ► button to select the channel to be skipped when
using the CHA or CHT buttons. You will still be able to select this channel
using the number buttons on the remote control.
MTS
This option allows the selection of a second audio program, which may contain commentary or a different
language, such as Spanish.
38
www.VIZIO.com