Main – Vizio VF550M User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VF550M User Manual
d. When finished, the Complete screen will be displayed to inform you that the HDTV has
completed the Initial Setup.
Press the ► button on the remote
control to exit and begin watching
TV.
Initia! Setup
Compiete
Select the Input Source for the HDTV by pressing f
the INPUT button on the side of the TV or using the
i
Input button on the remote control. Pressing this
TV
button will cycle you through the following options:
TV, AV1, AV2, Componenti, ComponentZ, RGB,
HDMI 1, HDMI 2, HDMI3, HDMI4, and HDMI5.
Turn on your Cable Box, VCR, External TV Tuner
or Satellite Receiver and you will see a picture on
your HDTV. If there is no picture, make sure you
have selected the correct input on the HDTV.
If the selected input is TV, set the TV to either
channel 3 or channel 4 matching the channel which
has been selected on the back of the VCR, Cable
Box, External TV Tuner or Satellite Receiver;
please refer to Owner or User’s Manual of such equipment for details.
Main
Your HDTV will display the television station or program selected by the cable box, VCR, external
tuner, or satellite receiver. Use the remote control that came with that component to change programs or
channels. If the service being used is the one which setup includes a box with two outputs for two
different (distant) rooms, then scanning channels will help you to find the signal. Be aware that the
channel to be selected varies from provider to provider. You may have to call your provider to get the
specific channel when using your HDTV. Some examples of these channels are 105, 106, 115, and 116.
Version 3/4/2009
27