Time zone, Daylight saving, Channel info – Vizio VF550M User Manual
Page 39: Language, Pip (picture-in-picture), Pip mode, Daylight saving channel info, Language pip (picture-in-picture), Setup menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Time Zone
Setting the correct Time Zone for your area will ensure that the correct program times are shown after
pressing the GUIDE button on the remote control.
Daylight Saving
Setting the daylight saving time for your area will ensure that the correct program times are shown after
pressing the GUIDE button on the remote control.
Channel Info
Channel Info displays the technical information of the channel including channel number, frequency,
modulation type, status, SNR (signal noise ratio), and signal strength.
VIZIO VF550M User Manual
Setup Menu
1. Press the
MENU
button on the remote control or the side of the TV. The Picture menu will be shown
on the screen.
2.
Press either
Á
or
T
on the remote control or CH
Á
or CH
T
on the side of
the HDTV to highlight the Setup menu option, and then press the
MENU
button to select the Setup menu.
3. Press either
Á
or
T
on the remote control or CH
Á
or CH
T
on the side of
the HDTV to select an Input menu option.
4.
Once the menu option is highlighted, press either ◄ or ► on the remote
control or VOL + or VOL - on the side of the HDTV to adjust the setting.
5. Press the
LAST
key once to return to the previous screen or repeatedly to
return to your program if the task has been completed.
Setup menu options:
Language
Select to change the Language of the OSD. The default is English. You can also
select Español or Français.
PIP (Picture-in-Picture)
Your TV features PIP mode so you can watch two pictures at the same time. One picture is displayed as
the full screen (main screen) and the other picture is displayed in a small window (sub screen).
Note: PIP is only available when the Parental Controls are OFF.
To select the options in the PIP sub-menu, press the
MENU
button or the ► button. A new menu will be
displayed showing the following PIP settings:
PIP Mode
Select from Off, PIP or POP (Picture-outside picture). In PIP mode a smaller sub-screen is
displayed on top of the main screen. In POP mode the main screen and sub-screen are of equal
size and are positioned side-by-side.
Version 3/4/2009
39