Kenwood TM-451A - Manual (Page 115)

GLOSSARY
APO (Automatic Power Off)
A function that automatically turns OFF the transceiver
after some period of inactivity.
Auto Page Cancel
A function that automatically switches OFF the Page
function after Page codes have been transmitted. The
purpose is to avoid sending Page codes at the start of
every transmission.
Automatic Transmit Offset
This function is for repeater users. It automatically
selects the correct transmit frequency offset (both
direction and amount) according to established band
plans.
Autopatch
A service available widely in the U.S.A. and Canada that
allows portable or mobile stations to access the public
telephone network by connecting through a local
repeater. Telephone numbers are sent via DTMF signals
by using the microphone DTMF keypad. Only non­
commercial communication is authorized.
Band Scan
A function that monitors sequentially all frequencies in a
single band. See "Scan".
Beep Tone
A selectable function that generates a tone each time a
button is pressed to provide audible confirmation that the
button was actually pressed.
Call channel
A frequency intended for establishing contact with other
stations. A microphone key is dedicated to the Call
channel so the frequency can be recalled quickly.
Call/Memory Scan
A function that allows alternate monitoring of the Call
channel and the current memory channel. The current
memory channel is the memory channel selected or
used last. See "Scan".
108