Selecting offset values manually j – Kenwood TM-451A User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
The TM-251E Automatic Offset is programmed as
follows:
European Versions
145.600
145.800
MHz
S: Simplex
50
If you need to use a non-standard offset for any reasonil
a value can be selected from Menu A as follows:
1 Press [F] (1 s) to enter Menu A.
2 Select" - +" {page 22}.
• " - +" begins blinking and the current offset value]
appears.
SELECTING OFFSET VALUES MANUALLY
J
o
/ 7n N • w
-dlZIB-
/ / I \ \
SaRF
1
3
5
7
»
OVER
3 Select an offset value.
• The available selections include any value up to
40 MHz in steps equal to the current VFO step
size.
• Default: d
(d: TM-251A/E: 600 kHz, TM-451A: 5 MHz,
TM-451E: 1.6 MHz)
4 Exit Menu A.
Advertising