Kenwood KDC-MP408U - Manual (Page 13)

5 Repeat steps 3 and 4, and complete the
Security Code.
6 Confirm the Security Code
Press the Control knob for at least 3 second.
When "RE-ENTER" is displayed, "CODE" is also
displayed.
7 Do the step 3 through 6 operation, and reenter
the Security Code.
"APPROVED" is displayed.
The Security Code function activates.
• If you enter the wrong Code in steps 3 through 5, repeat
from step 3.
• When the Security Code function is activated, "SECURITY
SET" changes to "SECURITY CLR".
• To deactivate the Security Code function, see the next
section <Deactivating Security Code>.
8 Exit Security Code mode
Press the [M JOG] button.
Entering Security Code
The Security Code is required to use the audio unit
when the unit is first used after removed from the
battery power source or the Reset button is pressed.
1 Turn the power ON.
2 Do the step 3 through 6 operation, and enter
the Security Code.
"APPROVED" is displayed.
Deactivating Security Code________________
Deactivating the Security Code function.
1 Select Security Code item during Menu mode
Select the "SECURITY CLR" display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Security Code mode
Press the Control knob for at least 1 second.
When "ENTER" is displayed, "CODE" is also displayed.
3 Select the digits to enter
Push the Control knob towards right or left.
4 Select the Security Code numbers
Push the Control knob towards up or down.
5 Repeat steps 3 and 4, and complete the
Security Code.
6 Press the Control knob for at least 3 second.
"CLEAR" is displayed.
The Security Code function deactivates.
7 Exit Security Code mode
Press the [M JOG] button.
If the entered security code is incorrect, "ERROR" is
displayed. Enter a correct security code.
Manual Clock Adjustment________________
1 Select Clock Adjustment item during Menu
mode
Select the "CLOCK ADJUST" display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
3 Adjust the time
Push the control knob towards up or down to
adjust the hours and right or left to adjust the
minutes.
4 Exit Clock adjustment mode
Press the [M JOG] button.
Function of KDC-X492
When LX AMP unit connecting
AMP Control_______________________________
You can control the LX AMP connected to the unit.
1 Select AMP Control item during Menu mode
Select the "AMS CONTROL" display.
For how to select menu items, refer to <Menu
System>(page 12).
2 Enter AMP Control mode
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Control knob towards up or down.
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMR
4 Adjust the AMP Control item
Push the Control knob towards right or left.
5 Exit AMP Control mode
Press the [M JOG] button.
English I 13