English, Audio setup, Speaker setting – Kenwood KDC-MP408U User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Audio Setup
You can set Sound system, such as follows;
Speaker Setting
mmmnm
n$pliy
...... T....:......
j
Front High Pass Filter*
"HPF"
Through/40*V60*V80/100/120/
150/180/220*' Hz
Rear High Pass Filter*
"HPR"
Through/40*’/60*'/80/100/120/
150/180/220*' Hz
Low Pass Filter
"LPFSW"
50*'/60*'^/80/100*'/120/160*V
Through Hz
Subwoofer Phase* "PHASE"
Reverse (180°)/Normal (0°)
Volume offset
"V-OFFSET"-8 —±0(AUX: -8—+8)
Loudness*
"LOUDNESS"OFF/ON
Dual Zone System*"2Z0NE"
OFF/ON
‘Function of KDC-X492/KDC-MP438U/KDC-MP408U.
*'KDC-X492 only. *^KDC-MP438U/KDC-MP408U only.
*^KDC-MP338 only.
• Volume offset: Sets each source's volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary Input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by"ZONE2"of <Menu
System> (page 12).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 6) or
[A]/[V]
button on the remote control
(page 15).
-The Audio Control has no effect on sub source.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the Control knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the Control knob.
4 Adjust the Audio setup item
Turn the Control knob.
5 Exit Audio Setup mode
Press the Control knob for at least 1 second.
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Smimtm
i
n$i^
OFF
"SP SEE OFF"
For5&4in. speaker
"SPSEL5/4"
For 6 & 6x9 in. speaker
"SPSEL 6*9/6"
For the OEM speaker
"SP SEE OEM"
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Speaker Setting mode
Press the Control knob.
3 Select the Speaker type
Turn the Control knob.
4 Exit Speaker Setting mode
Press the Control knob.
English